Hondata K-PRO

The Hondata K-Series Programmable ECU (K-PRO) consists of a hardware modification to any Honda K-Series ECU, plus Windows software which allows you to re-program the ECU and data-log sensors.

Product Notes:

• Choice ECU w/K-PRO installation: Customer supplied ECU or purchased with ECU.ECU purchase does not require a core.
• *K-PRO cost for 05-06 RSX vehicle use includes adapter harness
• Other applications available – please call 626.287.5000

Note for customer supplied ECU: Hondata will inspect the condition of your core ECU before the K-PRO installation takes place. If they find a problem with your core ECU and cannot perform the K-PRO installation (ie. water damage, burned pcb, etc) you will hear back from us. The customer is responsible for all shipping fees.

05-06 RSX K-PRO Note:
Hondata modifies the 02-04 PRB ECU specifically for 05-06 RSX use which also includes an adapter harness. Once modified, the 02-04 PRB ECU cannot be used for 02-04 RSX anymore. Hondata does not modify 05-06 PRB ECU’s.

Acceptable Customer Supplied ECU’s For K-PRO:

RSX (DC5) ECU:

• PRB – 02-04 RSX Type-S
• PRB (A01-A12 & 305) – 05-06 RSX Type-S
• PRC – 01-06 RSX Type-R (JDM)
  **see JDM ECU note below
• PND – 02-04 RSX Base (5spd)
• PND (A01-A09) – 05-06 RSX Base (5spd)

Civic (EP3) ECU:

• PRD – 03-05 Civic Type-R (JDM / 6spd)
  **see JDM ECU note below
• PNF – 02-05 Civic Si (5spd ECU)

Note: 5-speed ECU’s do not have reverse lock out capabilities when used with a 6-speed K-series transmission. Miss-shifting into reverse while moving forward can/will result in certain catastrophic transmission destruction! JHPUSA and Hondata will NOT be responsible for transmission damages.

**JDM ECU Note: Hondata may or may not accept JDM PRC or PRD ECU’s. These ECU’s can sometimes acquire certain damage or issues due to overseas shipping (water damage for example). So, just be aware that your JDM ECU may or may not be rejected by Hondata once sent in by us for a KPRO job. We will inform you if it is rejected.

Main Features:

• KPRO components are contained within the ECU
• USB connection for speed and compatibility
• KManager Windows based software for parameter & table editing, calibration uploading and datalogging.
• Many built-in calibrations for common engine combinations
• Built in datalogging to a laptop
• On board datalogging memory (2 MB memory, 10-110 minutes datalogging)
• Adjustment for different sized injectors, with over